H3C IE4300 Command Reference Manual page 1541

[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping special-query source-ip 10.1.1.1
Related commands
(IGMP-snooping view)
enable
igmp-snooping enable
igmp-snooping static-group
Use
igmp-snooping static-group
group.
Use
undo igmp-snooping static-group
Syntax
igmp-snooping static-group group-address [ source-ip source-address ]
vlan vlan-id
undo igmp-snooping
source-address ] vlan vlan-id | all }
Default
A port is not a static member port of a multicast group.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
group-address
239.255.255.255.
source-ip source-address
multicast source, this command configures the port as a static member port for a multicast source
and group. If you do not specify a multicast source, this command configures the port as a static
member port for a multicast group. This option takes effect on IGMPv3 snooping devices.
vlan vlan-id
: Specifies all multicast groups.
all
Examples
# Configure GigabitEthernet 1/0/1 as a static member port of the multicast source and group (1.1.1.1,
225.0.0.1) in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping version 3
[Sysname-vlan2] quit
[Sysname] interface GigabitEthernet 1/0/1
static-group
: Specifies a multicast group address in the range of 224.0.1.0 to
: Specifies a multicast source by its IP address. If you specify a
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
to configure a port as a static member port of a multicast
to remove the configuration of static member ports.
{ group-address
45
[ source-ip