H3C IE4300 Command Reference Manual page 1473

Parameters
critical
: Sets the high prefix priority for routes.
high
: Sets the medium prefix priority for routes.
medium
Examples
# Configure node 10 in permit mode for routing policy policy1 to set prefix priority critical for routes
matching prefix list abc.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match ip address prefix-list abc
[Sysname-route-policy-policy1-10] apply prefix-priority critical
apply tag
Use
apply tag
Use
undo apply tag
Syntax
apply tag tag-value
undo apply tag
Default
No routing tag is set for IGP routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
tag-value
Examples
# Configure node 10 in permit mode for routing policy policy1 to set a tag of 100 for IGP routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] apply tag 100
continue
Use
continue
Use
undo continue
Syntax
continue [ node-number ]
undo continue
: Sets the critical prefix priority for routes.
to set a tag for IGP routes.
to restore the default.
: Specifies the tag value in the range of 0 to 4294967295.
to specify the next node to be matched.
to restore the default.
4