H3C IE4300 Command Reference Manual page 1461

Field
if-match acl
apply next-hop
Related commands
ipv6 policy-based-route
display ipv6 policy-based-route interface
Use
display ipv6 policy-based-route interface
configuration and statistics.
Syntax
display
interface-number [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
slot slot-number
member device, this command displays IPv6 interface PBR configuration and statistics for the
master device.
Examples
# Display IPv6 PBR configuration and statistics on VLAN-interface 2.
<Sysname> display ipv6 policy-based-route interface vlan-interface 2
Policy based routing information for interface Vlan-inerface2(failed):
Policy name: aaa
node 0 deny:
Matched: 0
node 1 permit:
if-match acl 3999
Matched: 0
node 2 permit:
if-match acl 2000
apply next-hop 1000::1
Matched: 0
node 5 permit:
if-match acl 3101
apply next-hop 1000::1
Matched: 0
Total matched: 0
<Sysname> display ipv6 policy-based-route interface Vlan-inerface2
(system view)
ipv6 policy-based-route
: Specifies an IRF member device by its member ID. If you do not specify a
Description
Compares IPv6 packets with IPv6 ACL.
Specifies a next hop for permitted IPv6 packets.
interface
: Specifies an interface by its type and number.
3
to display IPv6 interface PBR
interface-type