H3C IE4300 Command Reference Manual page 1508

GigabitEthernet1/0/3
Status: Enable
Table 8 Command output
Field
Total 1 entries, 1 matched
(10.1.1.2, 225.1.1.1)
Protocol
VLAN
Flag
Status
Ingress port
List of 1 egress ports
Related commands
reset l2-multicast fast-forwarding cache all
display l2-multicast ip
Use
display l2-multicast ip
Syntax
display l2-multicast ip [ group group-address | source source-address ] *
[ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Flag: 0x10
Description
Total number of (S, G) entries in the Layer 2 multicast fast forwarding table,
and the total number of matching entries.
(S, G) entry in the Layer 2 multicast fast forwarding table.
Protocol number.
VLAN ID.
Flag for the (S, G) entry or the outgoing port.
This field displays one flag or the sum of multiple flags. In this example, the
value 0x2 means that the entry has only one flag 0x2.
The following flags are available for an entry:
•
0x1—The entry is created because of packets passed through between
cards.
•
0x2—The entry is added by multicast forwarding.
The following flags are available for an outgoing interface:
•
0x1—The port is added to the entry because of packets passed through
between cards.
•
0x2—The port is added to an existing entry.
•
0x10—The port is associated with the entry.
•
0x20—The port is to be deleted.
Status of the (S, G) entry or the outgoing port:
•
Enabled—Available.
•
Disabled—Unavailable.
Incoming port of the (S, G) entry.
Outgoing port list of the (S, G) entry.
to display information about Layer 2 IP multicast groups.
12