H3C IE4300 Command Reference Manual page 1677

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]
number. If you do not specify an interface, this command displays ACL application information for
packet filtering on all interfaces. If you specify an Ethernet interface, you do not need to specify the
slot slot-number
: Specifies the inbound direction.
inbound
: Specifies the outbound direction.
outbound
slot slot-number
member device, this command displays ACL application information for packet filtering for the
master device.
Usage guidelines
If neither the
ACL application information for packet filtering in both directions.
Examples
# Display ACL application information for inbound packet filtering on interface GigabitEthernet 1/0/1.
<Sysname> display packet-filter interface gigabitethernet 1/0/1 inbound
Interface: GigabitEthernet1/0/1
Inbound policy:
IPv4 ACL 2001r
IPv6 ACL 2002 (Failed)
MAC ACL 4003
Table 1 Command output
Field
Interface
Inbound policy
Outbound policy
IPv4 ACL 2001
IPv6 ACL 2002 (Failed)
Hardware-count
Hardware-count (Failed)
IPv4 default action
option.
: Specifies an IRF member device by its member ID. If you do not specify a
keyword nor the
inbound
keyword is specified, this command displays
outbound
Description
Interface to which the ACL applies.
ACL used for filtering incoming traffic.
ACL used for filtering outgoing traffic.
IPv4 basic ACL 2001 has been successfully applied.
The device has failed to apply IPv6 basic ACL 2002.
ACL rule match counting in hardware has been successfully
enabled.
The device has failed to enable counting ACL rule matches in
hardware.
Packet filter default action for packets that do not match any IPv4
ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
8
: Specifies an interface by its type and