H3C IE4300 Command Reference Manual page 1487

Views
Routing policy node view
Predefined user roles
network-admin
Parameters
: Matches the destination address of IPv6 routes.
address
: Matches the next hop of IPv6 routes.
next-hop
route-source
acl ipv6-acl-number
ipv6-acl-number
next-hop
prefix-list prefix-list-name
string of 1 to 63 characters.
Usage guidelines
When you specify an IPv6 ACL, follow these guidelines:
•
If the specified ACL does not exist or has no rules, all IPv6 routes can match the ACL.
•
If a rule in the specified ACL is applied to a VPN instance, the rule does not take effect.
•
If a rule in the specified ACL is not applied to any VPN instance, the rule takes effect on both
VPN packets and public-network packets.
Examples
# Configure node 10 of routing policy policy1 to permit routes whose next hop matches IPv6 prefix
list p1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match ipv6 next-hop prefix-list p1
ipv6 prefix-list
Use
ipv6 prefix-list
Use
undo ipv6 prefix-list
Syntax
ipv6 prefix-list prefix-list-name [ index index-number ] { deny | permit }
ipv6-address
[ less-equal max-prefix-length ] | inverse inverse-prefix-length }
undo ipv6 prefix-list prefix-list-name [ index index-number ]
Default
No IPv6 prefix lists exist.
Views
System view
Predefined user roles
network-admin
: Matches the source address of IPv6 routes.
: Specifies an IPv6 ACL by its number. The value range for the
argument is 2000 to 3999 for the
and
route-source
to configure an IPv6 prefix list or an item for it.
{ prefix-length
address
keywords.
: Specifies an IPv6 prefix list by its name, a case-sensitive
to remove an IPv6 prefix list or an item.
[ greater-equal
18
keyword, and 2000 to 2999 for the
min-prefix-length ]