H3C IE4300 Command Reference Manual page 1727

Syntax
display qos policy interface [ interface-type interface-number ] [ inbound
| outbound ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
: Specifies the QoS policy applied to incoming traffic.
inbound
: Specifies the QoS policy applied to outgoing traffic.
outbound
Usage guidelines
If you do not specify a direction, this command displays the QoS policy applied to incoming traffic
and the QoS policy applied to outgoing traffic.
Examples
# Display the QoS policy applied to the incoming traffic of GigabitEthernet 1/0/1.
<Sysname> display qos policy interface gigabitethernet 1/0/1 inbound
Interface: GigabitEthernet1/0/1
Direction: Inbound
Policy: 1
Classifier: 1
Matched : 0 (Packets) 0 (Bytes)
5-minute statistics:
Forwarded: 0/0 (pps/bps)
Dropped
Operator: AND
Rule(s) :
If-match acl 2000
Behavior: 1
Marking:
Remark dscp 3
Committed Access Rate:
CIR 112 (kbps), CBS 51200 (Bytes), EBS 512 (Bytes)
Green action
Yellow action : pass
Red action
Green packets : 0 (Packets) 0 (Bytes)
Yellow packets: 0 (Packets) 0 (Bytes)
Red packets
Classifier: 2
Matched : 0 (Packets) 0 (Bytes)
5-minute statistics:
Forwarded: 0/0 (pps/bps)
Dropped
: 0/0 (pps/bps)
: pass
: discard
: 0 (Packets) 0 (Bytes)
: 0/0 (pps/bps)
: Specifies an interface by its type and number.
20