H3C IE4300 Command Reference Manual page 1590

<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] dscp 63
enable (MLD-snooping view)
Use
enable
Use
undo enable
Syntax
enable vlan vlan-list
undo enable vlan vlan-list
Default
The MLD snooping status in a VLAN is consistent with the global MLD snooping status.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
vlan vlan-list
VLAN by its ID or a range of VLANs in the form of
ID is in the range of 1 to 4094.
Usage guidelines
You must enable the MLD snooping feature by using the
enable MLD snooping for VLANs.
You can enable MLD snooping for multiple VLANs by using this command in MLD-snooping view or
for a VLAN by using the
VLAN view has the same priority as the configuration in MLD-snooping view, and the most recent
configuration takes effect.
Examples
# Enable the MLD snooping feature, and then enable MLD snooping for VLAN 2 through VLAN 10.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] enable vlan 2 to 10
Related commands
mld-snooping
mld-snooping enable
entry-limit (MLD-snooping view)
Use
entry-limit
including dynamic entries and static entries.
Use
undo entry-limit
to enable MLD snooping for VLANs.
to disable MLD snooping for VLANs.
: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a
mld-snooping enable
to globally set the maximum number of MLD snooping forwarding entries,
to restore the default.
start-vlan-id to end-vlan-id
mld-snooping
command in VLAN view. The configuration in
18
. The VLAN
command before you