H3C IE4300 Command Reference Manual page 1538

[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping report source-ip 10.1.1.1
Related commands
(IGMP-snooping view)
enable
igmp-snooping enable
igmp-snooping router-aging-time
Use
igmp-snooping router-aging-time
VLAN.
Use
undo igmp-snooping router-aging-time
Syntax
igmp-snooping router-aging-time seconds
undo igmp-snooping router-aging-time
Default
The aging timer for dynamic router ports is 260 seconds.
Views
VLAN view
Predefined user roles
network-admin
Parameters
: Specifies an aging timer for dynamic router ports, in the range of 1 to 8097894 seconds.
seconds
Usage guidelines
You must enable IGMP snooping for a VLAN before you execute this command.
You can set the timer for a VLAN in VLAN view or globally for all VLANs in IGMP-snooping view. For
a VLAN, the VLAN-specific configuration takes priority over the global configuration.
Examples
# In VLAN 2, enable IGMP snooping, and set the aging timer for dynamic router ports to 100
seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping router-aging-time 100
Related commands
(IGMP-snooping view)
enable
igmp-snooping enable
router-aging-time
(IGMP-snooping view)
42
to set the aging timer for dynamic router ports in a
to restore the default.