H3C IE4300 Command Reference Manual page 1644

subvlan (IPv6 multicast VLAN view)
Use
subvlan
Use
undo subvlan
Syntax
subvlan vlan-list
undo subvlan { all | vlan-list }
Default
An IPv6 multicast VLAN does not have sub-VLANs.
Views
IPv6 multicast VLAN view
Predefined user roles
network-admin
Parameters
vlan-list
by its ID or a range of VLANs in the form of
for the VLAN ID is 1 to 4094. The specified VLANs must exist and cannot be multicast VLANs or
sub-VLANs of other IPv6 multicast VLANs.
: Specifies all sub-VLANs of the current IPv6 multicast VLAN.
all
Usage guidelines
You must enable MLD snooping for VLANs to be configured as sub-VLANs of an IPv6 multicast
VLAN.
Examples
# Assign VLAN 10 through VLAN 15 as sub-VLANs to multicast VLAN 100.
<Sysname> system-view
[Sysname] ipv6 multicast-vlan 100
[Sysname-ipv6-mvlan-100] subvlan 10 to 15
to assign VLANs as sub-VLANs to an IPv6 multicast VLAN.
to delete sub-VLANs from an IPv6 multicast VLAN.
: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN
start-vlan-id to end-vlan-id
9
. The value range