Show Arp Brief; Show Arp Switch - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
MAC Address The hardware MAC address of that device.
Interface The routing unit/slot/port associated with the device ARP entry.
Type The type that is configurable. The possible values are Local, Gateway, Dynamic and
Static.
Age The current age of the ARP entry since last refresh (in hh:mm:ss format )

show arp brief

This command displays the brief Address Resolution Protocol (ARP) table information.
Format
show arp brief
Mode Privileged EXEC
Term Definition
Age Time The time it takes for an ARP entry to age out. This value is configurable. Age time is
(seconds)
measured in seconds.
Response Time The time it takes for an ARP request timeout. This value is configurable. Response time is
(seconds)
measured in seconds.
Retries The maximum number of times an ARP request is retried. This value is configurable.
Cache Size The maximum number of entries in the ARP table. This value is configurable.
Dynamic Renew Displays whether the ARP component automatically attempts to renew dynamic ARP
Mode
entries when they age out.
Total Entry The total entries in the ARP table and the peak entry count in the ARP table.
Count Current /
Peak
Static Entry The static entry count in the ARP table and maximum static entry count in the ARP table.
Count Current /
Max

show arp switch

This command displays the contents of the switch's Address Resolution Protocol (ARP) table.
Format
show arp switch
Mode Privileged EXEC
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-7