Show Classofservice Ip-Dscp-Mapping; Show Classofservice Trust; Show Interfaces Cos-Queue - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
IP Precedence
Traffic Class

13.1.10 show classofservice ip-dscp-mapping

This command displays the current IP DSCP mapping to internal traffic classes for the
global configuration settings.
Format
Mode
The following information is repeated for each user priority.
IP DSCP
Traffic Class

13.1.11 show classofservice trust

This command displays the current trust mode setting for a specific interface. The slot/port
parameter is optional and is only valid on platforms that support independent per-port
class of service mappings. If specified, the port trust mode of the interface is displayed. If
omitted, the most recent global configuration settings are displayed.
Format
Mode
Non-IP Traffic
Class
Untrusted Traffic
Class

13.1.12 show interfaces cos-queue

This command displays the class-of-service queue configuration for the specified
interface. The slot/port parameter is optional and is only valid on platforms that support
independent per-port class of service mappings. If specified, the class-of-service queue
configuration of the interface is displayed. If omitted, the most recent global configuration
settings are displayed.
13-6
The IP Precedence value.
The traffic class internal queue identifier to which the IP Pre-
cedence value is mapped.
show classofservice ip-dscp-mapping
Privileged EXEC
The IP DSCP value.
The traffic class internal queue identifier to which the IP
DSCP value is mapped.
show classofservice trust [slot/port]
Privileged EXEC
The traffic class used for non-IP traffic. This is only dis-
played when the COS trust mode is set to trust ip-precedence.
The traffic class used for all untrusted traffic. This is only dis-
played when the COS trust mode is set to 'untrusted'.
v1.0, November 2007
Quality of Service (QoS) Commands