Cos-Queue Min-Bandwidth; Cos-Queue Strict - NETGEAR GSM7228PS Cli Manual

cos-queue min-bandwidth

This command specifies the minimum transmission bandwidth guarantee for each interface queue.
The total number of queues supported per interface is platform specific. A value from 0-100
(percentage of link rate) must be specified for each supported queue, with 0 indicating no
guaranteed minimum bandwidth. The sum of all values entered must not exceed 100.
Format
cos-queue min-bandwidth <bw-0> <bw-1> ... <bw-n>
Modes • Global Config
• Interface Config
no cos-queue min-bandwidth
This command restores the default for each queue's minimum bandwidth value.
Format
no cos-queue min-bandwidth
Modes • Global Config
• Interface Config

cos-queue strict

This command activates the strict priority scheduler mode for each specified queue.
Format
cos-queue strict <queue-id-1> [<queue-id-2> ... <queue-id-n>]
Modes • Global Config
• Interface Config
no cos-queue strict
This command restores the default weighted scheduler mode for each specified queue.
Format
no cos-queue strict <queue-id-1> [<queue-id-2> ... <queue-id-n>]
Modes • Global Config
• Interface Config
Quality of Service (QoS) Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
8-4