Show Spanning-Tree Mst Port Detailed - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
MSTP BPDUs
Received

5.2.4 show spanning-tree mst port detailed

This command displays the detailed settings and parameters for a specific switch port
within a particular multiple spanning tree instance. The parameter
that corresponds to the desired existing multiple spanning tree instance. The
is the desired switch port.
port>
Format
Mode
MST Instance ID
Port Identifier
Port Priority
Port Forwarding
State
Port Role
Auto-Calculate
Port Path Cost
Port Path Cost
Auto-Calculate
External Port Path
Cost
External Port Path
Cost
Designated Root
5-14
Multiple Spanning Tree Protocol Bridge Protocol Data Units
received.
show spanning-tree mst port detailed <mstid>
<unit/slot/port>
Privileged EXEC
User EXEC
The ID of the existing MST instance.
The port identifier for the specified port within the selected
MST instance. It is made up from the port priority and the
interface number of the port.
The priority for a particular port within the selected MST
instance. The port priority is displayed in multiples of 16.
Current spanning tree state of this port.
Each enabled MST Bridge Port receives a Port Role for each
spanning tree. The port role is one of the following values:
Root Port, Designated Port, Alternate Port, Backup Port,
Master Port or Disabled Port
This indicates whether auto calculation for port path cost is
enabled.
Configured value of the Internal Port Path Cost parameter.
This indicates whether auto calculation for external port path
cost is enabled.
Configured value of the external Port Path Cost parameter.
The Identifier of the designated root for this port.
v4.1, October 2008
is a number
<mstid>
Spanning Tree Protocol Commands
<unit/slot/