Show Spanning-Tree Summary; Show Spanning-Tree Vlan - NETGEAR GSM7228PS Cli Manual

show spanning-tree summary

This command displays spanning tree settings and parameters for the switch. The following details
are displayed on execution of the command.
Format
show spanning-tree summary
Mode • Privileged EXEC
• User EXEC
Term Definition
Spanning Tree Enabled or disabled.
Adminmode
Spanning Tree Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE 802.1d) based
Version
upon the Force Protocol Version parameter.
BPDU Guard Enabled or disabled.
Mode
BPDU Filter Enabled or disabled.
Mode
Configuration Identifier used to identify the configuration currently being used.
Name
Configuration Identifier used to identify the configuration currently being used.
Revision Level
Configuration A generated Key used in the exchange of the BPDUs.
Digest Key
Configuration Specifies the version of the configuration format being used in the exchange of BPDUs.
Format Selector
The default value is zero.
MST Instances List of all multiple spanning tree instances configured on the switch.

show spanning-tree vlan

This command displays the association between a VLAN and a multiple spanning tree instance.
The <vlanid> corresponds to an existing VLAN ID.
Format
show spanning-tree vlan <vlanid>
Mode • Privileged EXEC
• User EXEC
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-30