Show Spanning-Tree Mst Port Summary; Show Spanning-Tree Mst Summary - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Point To Point
MAC Status
CST Regional
Root
CST Port Cost

5.2.5 show spanning-tree mst port summary

This command displays the settings of one or all ports within the specified multiple
spanning tree instance. The parameter
parameter {
<unit/slot/port> | all}
If you specify 0 (defined as the default CIST ID) as the
displays for one or all ports within the common and internal spanning tree.
Format
Modes
MST Instance ID
Interface
Type
STP State
Port Role
Link Status
Link Trap

5.2.6 show spanning-tree mst summary

This command displays summary information about all multiple spanning tree instances in
the switch. On execution, the following details are displayed.
Format
Modes
5-16
Derived value indicating if this port is part of a point to point
link
.
The regional root identifier in use for this port.
The configured path cost for this port.
indicates a particular MST instance. The
<mstid>
indicates the desired switch port or all ports.
show spanning-tree mst port summary <mstid> {<unit/
slot/port> | all}
Privileged EXEC
User EXEC
The MST instance associated with this port.
Valid slot and port number separated by forward slashes.
Currently not used.
The forwarding state of the port in the specified spanning tree
instance
The role of the specified port within the spanning tree.
The operational status of the link. Possible values are "Up" or
"Down".
The link trap configuration for the specified interface.
show spanning-tree mst summary
Privileged EXEC
User EXEC
v3.0, January 2008
, the status summary
<mstid>
Spanning Tree Protocol Commands