Show Spanning-Tree Mst Port Summary - NETGEAR GSM7228PS Cli Manual

Term Definition
Topology Value of flag in next Configuration Bridge Protocol Data Unit (BPDU) transmission
Change
indicating if a topology change is in progress for this port.
Acknowledgem
ent
Hello Time The hello time in use for this port.
Edge Port The configured value indicating if this port is an edge port.
Edge Port The derived value of the edge port status. True if operating as an edge port; false
Status
otherwise.
Point To Point Derived value indicating if this port is part of a point to point link.
MAC Status
CST Regional The regional root identifier in use for this port.
Root
CST Internal The internal root path cost to the LAN by the designated external port.
Root Path Cost
Loop The current loop inconsistent state of this port in this MST instance. When in loop
Inconsistent
inconsistent state, the port has failed to receive BPDUs while configured with loop guard
State
enabled. Loop inconsistent state maintains the port in a "blocking" state until a
subsequent BPDU is received.
Transitions Into The number of times this interface has transitioned into loop inconsistent state.
Loop
Inconsistent
State
Transitions Out The number of times this interface has transitioned out of loop inconsistent state.
of Loop
Inconsistent
State

show spanning-tree mst port summary

This command displays the settings of one or all ports within the specified multiple spanning tree
instance. The parameter <mstid> indicates a particular MST instance. The parameter {<unit/
slot/port> | all} indicates the desired switch port or all ports.
If you specify 0 (defined as the default CIST ID) as the <mstid>, the status summary displays for
one or all ports within the common and internal spanning tree.
Format
show spanning-tree mst port summary <mstid> {<unit/slot/port> | all}
Mode • Privileged EXEC
• User EXEC
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-28