Port-Channel Show Commands; Show Port-Channel - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
Format

12.2 Port-Channel Show Commands

This section describes the commands you use to view port-channel status and
configuration information.

12.2.1 show port-channel

This command displays the static capability of all port-channels (LAGs) on the device as
well as a summary of individual port-channels.
Format
Modes
Static Capability
For each port-channel the following information is displayed:
Name
Link State
Mbr Ports
Active Ports
12.2.2 show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format
Modes
Logical Interface
Port-Channel
Name
Link State
12-6
no hashing-mode
show port-channel
Privileged EXEC
User EXEC
This field displays whether or not the device has static capa-
bility enabled.
This field displays the name of the port-channel.
This field indicates whether the link is up or down.
This field lists the ports that are members of this port-chan-
nel, in notation.
<slot/port>
This field lists the ports that are actively participating in this
port-channel.
show port-channel {<logical slot/port> | all}
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
The name of this port-channel (LAG). You may enter any
string of up to 15 alphanumeric characters.
Indicates whether the Link is up or down.
Port-Channel/LAG (802.3ad) Commands
v1.0, November 2007