Show Port-Channel - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

12.2.1 show port-channel

This command displays the static capability of all port-channels (LAGs) on the device as
well as a summary of individual port-channels.
Format
Modes
Static Capability
For each port-channel the following information is displayed:
Name
Link State
Mbr Ports
Active Ports
12.2.2 show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format
Modes
Logical Interface
Port-Channel
Name
Link State
Admin Mode
Hash Mode
Link Trap Mode
STP Mode
12-6
show port-channel
Privileged EXEC
User EXEC
This field displays whether or not the device has static capa-
bility enabled.
This field displays the name of the port-channel.
This field indicates whether the link is up or down.
This field lists the ports that are members of this port-chan-
nel, in
<unit/slot/port>
This field lists the ports that are actively participating in this
port-channel.
show port-channel {<logical unit/slot/port> | all}
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
The name of this port-channel (LAG). You may enter any
string of up to 15 alphanumeric characters.
Indicates whether the Link is up or down.
May be enabled or disabled. The factory default is enabled.
Displays the hashing algorithm for the port-channel (LAG).
This object determines whether or not to send a trap when
link status changes. The factory default is enabled.
The Spanning Tree Protocol Administrative Mode associated
with the port or port-channel (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Port-Channel/LAG (802.3ad) Commands
v4.1, October 2008
notation.