No Ip Dhcp Conflict Logging; Netbios-Name-Server; No Netbios-Name-Server; Netbios-Node-Type - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mode

no ip dhcp conflict logging

This command disables conflict logging on DHCP server.
Format
Mode

netbios-name-server

This command configures NetBIOS Windows Internet Naming Service (WINS) name servers that
are available to DHCP clients.
One IP address is required, although one can specify up to eight addresses in one command line.
Servers are listed in order of preference (address1 is the most preferred server, address2 is the next
most preferred server, and so on).
Default
Format
Mode

no netbios-name-server

This command removes the NetBIOS name server list.
Format
Mode

netbios-node-type

The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration
Protocol (DHCP) clients.type Specifies the NetBIOS node type. Valid types are:
• b-node—Broadcast
• p-node—Peer-to-peer
• m-node—Mixed
Switching Commands
Global Config
no ip dhcp conflict logging
Global Config
none
netbios-name-server <address>
[<address2>...<address8>]
DHCP Pool Config
no netbios-name-server
DHCP Pool Config
202-10102-01, May 2005
8-89