Ip Dhcp Bootp Automatic; Ip Dhcp Conflict Logging - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

7.2.4 ip dhcp bootp automatic

This command enables the allocation of the addresses to the bootp client. The addresses
are from the automatic address pool.
Default
Format
Mode
7.2.4.1 no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are
from the automatic address pool.
Format
Mode

7.2.5 ip dhcp conflict logging

This command enables conflict logging on DHCP server.
Default
Format
Mode
7.2.5.1 no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
Mode
DHCP Commands
disabled
ip dhcp bootp automatic
Global Config
no ip dhcp bootp automatic
Global Config
enabled
ip dhcp conflict logging
Global Config
no ip dhcp conflict logging
Global Config
v1.0, February 2007
7-11