Show Sntp; Show Sntp Client - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

Zone name: A name to associate with the time zone
Hours-offset: Number of hours difference with UTC
Minutes-offset: Number of minutes difference with UTC
no clock timezone
This command sets the switch to UTC time.
Format
no clock timezone
Mode Global Config

show sntp

This command is used to display SNTP settings and status.
Format
show sntp
Mode Privileged EXEC
Term Definition
Last Update Time of last clock update.
Time
Last Unicast Time of last transmit query (in unicast mode).
Attempt Time
Last Attempt Status of the last SNTP request (in unicast mode) or unsolicited message (in broadcast
Status
mode).
Broadcast Count Current number of unsolicited broadcast messages that have been received and
processed by the SNTP client since last reboot.
Multicast Count Current number of unsolicited multicast messages that have been received and
processed by the SNTP client since last reboot.

show sntp client

This command is used to display SNTP client settings.
Format
show sntp client
Mode Privileged EXEC
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
6-37