Setting The Saving Destination Drive For Backup Data - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
9 GOT Initial Setup

9.1.3 Setting the Saving Destination Drive for Backup Data

A saving destination drive for backup data (Refer to "Data Backup and Restoration") needs to be set on the GT
Designer3 project.
"A: Standard CF Card" or "E: USB Drive" can be chosen.
(1) Open the GT Designer3 project on the personal computer, and select [Common]-[GOT Setup]-[Basic Setting]-
[Display Setting/Language Setting].
(2) When checking the box of "Operation Setting/Utility Call Key" on the GOT setup screen, items for [Update the setting
of operation/utility call key] which are grayed out will be activated.
When checking the box of [Update the setting of operation/utility call key], items which are grayed out will be
activated.
IB-1501452-C 122