Setting The Saving Destination Drive For Backup Data - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
2 GOT Initial Setup

2.1.3 Setting the Saving Destination Drive for Backup Data

A saving destination drive for backup data (Refer to"Data Backup and Restoration") needs to be set on the GT
Designer3 project.
"A: Standard CF Card" or "E: USB Drive" (GT16 only) can be chosen.
(1) Open the GT Designer3 project with a personal computer, and select [Common]-[GOT Environmental Setting]-
[GOT Setup].
(2) Check the "Use GOT Setup" check box, then grey out items are available to set.
(3) Select the "Backup/Restore" tab, and then select "Destination for Backup Setting" and "Destination or Backup
Data".
18