Setting The Axis Configurations (Nc Axes, Plc Axes, Spindle); Setting Part System, The Number Of Axes, And Plc Axis - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
6 Setting Machine Parameters

6.2 Setting the Axis Configurations (NC axes, PLC axes, Spindle)

6.2.1 Setting Part System, the Number of Axes, and PLC Axis

Set the servo system's configuration connected to the CNC CPU.
(1) Display [BASE SPEC. PARAM] (SETUP 1.), and set the control axes configuration.
#1001 SYS_ON: Select the existence of PLC axes and part systems. (0: Not exist, 1: Exist)
#1002 axisno: Set the number of control axes and PLC axes.
#1003 iunit: Select the input setting value for each part system and the PLC axis. (B: 1μm, C: 0.1μm)
#1169 system name: Set a name for each part system. The names should be within 4 alphabets and/or numbers.
Setting example:
For "2 part systems (1st part system: three axes, 2nd part system: three axes), PLC axis: one axis"
Number of axes
Input setting
increment
Set data display
102
1st part system
2nd part system
Three axes
Existence of part system
Three axes
3rd part system does not exist
2nd part s ystem exists
PLC axis
Existence of PLC axis:
PLC axis exists