Preface
Block Diagrams
The functional descriptions in this User's Guide include block diagrams with symbols rep-
resenting logical or mathematical operations or selections, usually the result of writing a
value to a register. Figure 1 shows an example of a multiplexer with three inputs and one
output (the result).
Block diagrams can include symbols representing registers and the bit fields within them.
Figure 2 shows that the BITFIELDNAME bit field in the REGISTERNAME register enables
or disables the signal named OUTPUT.
xxxiv
LH75400/01/10/11 (Preliminary) User's Guide
CONTROL SIGNAL or
REGISTER/BITFIELD
INPUT
INPUT
FUNCTION
INPUT
Figure 1. Multiplexer
REGISTERNAME: BITFIELDNAME
INPUT
f ( )
Figure 2. Register with Bit Field Named
7/3/03
OUTPUT
OUTPUT
LH754xx-83
LH754xx-84