Setting and Using the Control and Management Functions
Setting the Internal Clock
Figure 12-2
Date/Time Properties Dialog Box ("Time Zone" Tab)
Step 7. In the drop-down list box select a time zone.
Step 8. To make the summertime setting automatically, check
daylight saving changes
Step 9. Press the
Setting the Date/Time Display ON/OFF
The date/time display in the instrument status bar can be switched on/off using the
following procedure.
Step 1. Press
Step 2. Press
Step 3. Press
Step 4. Press
250
to assign the check mark (
button.
OK
.
.
Misc Setup
.
Clock Setup
to switch the date/time display on/off.
Show Clock
Automatically adjust clock for
) to it.
Ö
Chapter 12