Appendix A. M A N U A L Changes; A-1.Introduction - Agilent Technologies 4284A Service Manual

A-1.INTRODUCTION

This appendix contains the information required to adapt this manual to earlier versions or
configurations of the HP 4284A than the current printing date of this manual. The informa-
tion in this manual applies directly to HP 4284A Precision LCR Meters whose serial number
prefix is listed on the title page of this manual.
A-2. MANUAL CHANGES
To adapt this manual to your HP 4284A, refer to Tables A and B, and make all of the
manual changes listed opposite your instrument's serial number and ROM-based firm-
ware's version.
Instruments manufactured after the printing of this manual may be different than those
documented in this manual. Later instrument versions will be docurriented in a manual
changes supplement that will accompany the manual shipped with that instrument. I f
your instrument serial number is not listed on the title page of this manual or in Table A, it
may be documented in a yellow MANUAL CHANGES supplement.
Refer to the description of the .IDN? command in SECTION 8, COMMAND REFERENCE,
OPERATION MANUAL for confirmation of the ROM-based firmware's version. F o r addi-
tional information on serial number coverage, refer to SECTION 1.
Table A. Manual Changes by Serial Number
Serial Prefix
or Number
Table B. Manual Changes by Firmware's Version
Version
APPENDIX A
MANUAL CHANGES
Make Manual Changes
There are no earlier configurations than the printing
date of this manual.
Make Manual Changes
There are no earlier versions than the printing date of
this manual.
A-1
CD
CD