Display Rmon Event - HP 6125G Command Reference Manual

Table 23 Command output
Field
AlarmEntry entry-number
owned by owner is status
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value

display rmon event

Syntax
display rmon event [ entry-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
entry-number: Specifies the index of an RMON event entry, which ranges from 1 to 65535. If no entry is
specified, the configuration of all event entries is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
Description
Status of the alarm entry entry-number created by the owner is status:
•
entry-number—Alarm entry, corresponding to the MIB node alarmIndex.
•
owner—Entry owner, corresponding to the MIB node alarmOwner.
•
status—Entry status, corresponding to the MIB node alarmStatus.
VALID—The entry is valid.
UNDERCREATION—The entry is invalid.
The display rmon command can display invalid entries, but the display
current-configuration and display this commands do not display their settings.
Sampling type (the value can be absolute or delta), corresponding to the MIB
node alarmSampleType.
Alarm variable, namely, the monitored MIB node, corresponding to the MIB
node alarmVariable.
Sampling interval, in seconds, corresponding to the MIB node alarmInterval.
Alarm rising threshold, corresponding to the MIB node alarmRisingThreshold.
When the sampling value is greater than or equal to this threshold, a rising
alarm is triggered.
Alarm falling threshold, corresponding to the MIB node alarmFallingThreshold.
When the sampling value is smaller than or equal to this threshold, a falling
alarm is triggered.
How an alarm can be triggered, corresponding to the MIB node
alarmStartupAlarm.
Last sampled value, corresponding to the MIB node alarmValue.
87