Table of Contents
Advertisement
Bulk interface configuration commands
display interface range
Use display interface range to display information about the interface ranges created by using the
interface range name command.
Syntax
display interface range [ name name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name name: Specifies an interface range by its name, a case-sensitive string of 1 to 32 characters.
If you do not specify an interface range name, the command displays information about the interface
ranges created by using the interface range name command.
Examples
# Display information about all existing interface ranges created by using the interface range name
command.
<Sysname> display interface range
Interface range name t2 GigabitEthernet1/0/1 GigabitEthernet1/0/2
Interface range name test GigabitEthernet1/0/11 GigabitEthernet1/0/12
The output shows the following:
•
Interfaces GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are added to interface range named
t2.
•
Interfaces GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12 are added to interface range
named test.
Related commands
interface range name
interface range
Use interface range to create an interface range and enter the interface range view.
Syntax
interface range interface-list
Views
System view
Predefined user roles
network-admin
52
Advertisement
Table of Contents
