Delta CT2000 Series User Manual page 386

8. Related parameters
Control of Speed Mode
Settings
Output Frequency of Motor 1（base frequency and motor rated frequency）
Settings
 This value should be set according to the rated frequency of the motor as indicated on
the motor nameplate. If the motor is 60Hz, the setting should be 60Hz. If the motor is
50Hz, it should be set to 50Hz.
Output Voltage of Motor 1（base frequency and motor rated frequency）
Settings
 This value should be set according to the rated voltage of the motor as indicated on the
motor nameplate. If the motor is 440V, the setting should be 440.0. If the motor is 400V, it
should be set to 400.0.
 There are many motor types in the market and the power system for each country is also
difference. The economic and convenience method to solve this problem is to install the
AC motor drive. There is no problem to use with the different voltage and frequency and
also can amplify the original characteristic and life of the motor.
Motor Auto Tuning
Settings
Chapter 12 Description of Parameter SettingsCT2000 Series
0: VF (IM V/f control)
1: VFPG (IM V/f control+ Encoder)
2: SVC(IM sensorless vector control)
3: FOCPG (IM FOC vector control+ encoder)
4: FOCPG（PM FOC vector control + Encoder）
5: FOC Sensorless (IM field oriented sensorless vector control)
6 : PM Sensorless (PM field oriented sensorless vector control)
7: IPM Sensorless (IPM field oriented sensorless vector control)
0.00~599.00Hz
460V series: 0.0~510.0V
0: No function
1: Rolling test for induction motor (Rs, Rr, Lm, Lx, no-load current)
2: Rolling test for induction motor
3: No function
4: Rolling test for PM motor magnetic pole
5: Rolling test for PM(SPM) motor
6: Rolling test for IM motor flux curve
12: FOC Sensorless inertia estimation
13: High frequency and blocked rotor test for IPM/SPM motor parameter
12.2-00-24
Factory Setting: 0
Factory Setting:
60.00/50.00
Factory Setting: 400.0
Factory Setting: 0