Delta CT2000 Series User Manual page 76

7-10 USB/RS-485 Communication Interface --- IFD6530
Warning
 Please thoroughly read this instruction sheet before installation and putting it into use.
 The content of this instruction sheet and the driver file may be revised without prior notice. Please
consult our distributors or download the most updated instruction/driver version at
http://www.delta.com.tw/product/em/control/cm/control_cm_main.asp
1. Introduction
IFD6530 is a convenient RS-485-to-USB converter, which does not require external power-supply and complex
setting process. It supports baud rate from 75 to 115.2kbps and auto switching direction of data transmission. In
addition, it adopts RJ-45 in RS-485 connector for users to wire conveniently. And its tiny dimension, handy use of
plug-and-play and hot-swap provide more conveniences for connecting all DELTA IABU products to your PC.
Applicable Models: All DELTA IABU products.
(Application & Dimension)
2. Specifications
Power supply
Power consumption
Isolated voltage
Baud rate
RS-485 connector
USB connector
Compatibility
Max. cable length
Support RS-485 half-duplex transmission
No external power is needed
1.5W
2,500VDC
75, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
RJ-45
A type (plug)
Full compliance with USB V2.0 specification
RS-485 Communication Port: 100 m
Chapter 7 Optional AccessoriesCT2000 Series
7-23