Delta CT2000 Series User Manual page 49

Chapter 6 Control TerminalsC2000 Series
Please remove the top cover before wiring the multi-function input and output terminals,
The drive appearances shown in the figures are for reference only, a real drive may look different.
Remove the cover for wiring.
Frame B
Loosen the screws and press the tabs on both sides
to remove the cover.
Screw torque: 12~15Kg-cm [10.4~13lb-in.]
Frame D
Loosen the screws and press the tabs on both sides to remove the cover.
Screw torque: 12~15Kg-cm [10.4~13lb-in.]
Frame C
Loosen the screws and press the tabs on both sides
to remove the cover.
Screw torque: 12~15Kg-cm [10.4~13lb-in.]
6-2