Delta CT2000 Series User Manual page 81

Chapter 8 Optional Cards CT2000 Series
Please select applicable option cards for your drive or contact local distributor for suggestion.
To prevent drive damage during installation, please removes the digital keypad and the cover before
wiring. Refer to the following instruction.
8-1 Remove key cover
Step 1
Frame B (Take flange mounted models as an example)
Screw torque: 12~15Kg-cm [10.4~13lb-in.]
Loosen the screw, and press the snap locks on the both side and rotate to pull it out.
Frame C (Take flange mounted models as an example)
Screw torque: 12~15Kg-cm [10.4~13lb-in.]
Loosen the screw, and press the snap locks on the both side and rotate to pull it out.
8-2