Delta CT2000 Series User Manual page 516

API
EADD
D P
120
Bit device
X Y M K
S1 ＊
S2
＊
D
Notes on operand usage:
Please refer to the function specifications table for each device in
series for the scope of device usage
S : addend. S

1
When the content of the register designated by S

register designated by S
Addition is performed entirely using binary floating-point numbers.
If the source operand S

transform that constant into a binary floating point number for use in addition.
In the situation when S

"continuous execution" command is employed, when conditional contact is On,
the register will perform addition once during each scan. Pulse execution type
commands (DEADDP) are generally used under ordinary circumstances.
When X0=On, a binary floating point number (D1, D0) will be added to a binary

floating point number (D3, D2), and the results stored in (D11, D10).
X0
 When X2 =On, a binary floating point number (D11, D10) will be added to K1234
(which has been automatically converted to a binary floating-point number), and
the results stored in (D21, D20).
X2
Word device
H KnX KnY KnM T
＊
＊
: augend. D: sum.
2
, and the result is stored in the register designated by D.
1
1
DEADD D0
DEADD D10
Chapter 16 PLC Function CT2000 Series
Adding binary floating point numbers
16-bit command
－
C D
＊
32-bit command (9 STEP)
＊
DEADD Continuous
＊
execution type
Flag signal: none
or S
designates a constant K or H, the command will
2
and S
designate identical register numbers, if a
1 2
D2 D10
K1234 D20
16-75
－ －
DEADDP
execution type
is added to the content of the
2
－
Pulse