Delta CT2000 Series User Manual page 179

Chapter 11 Summary of Parameter SettingsCT2000 Series
Pr. Explanation
06-23 Fault Output Option 1

06-24 Fault Output Option 2

06-25 Fault Output Option 3

06-26 Fault Output Option 4

Electronic Thermal Relay
06-27

Selection 2 (Motor 2)
Electronic Thermal
06-28

Characteristic for Motor 2
06-29 PTC/PT100 Detection Selection

06-30 PTC Level

Frequency Command for
06-31

Malfunction
Settings
56: Communication error (CE3)
57: Communication error (CE4)
58: Communication Time-out (CE10)
59: Reserved
60: Brake transistor error (bF)
61: Y- connection/ -connection switch error (ydc)
△
62: Decel. Energy Backup Error (dEb)
63: Slip error (oSL)
64 Electromagnet switch error (ryF)
:
65 : PG Card Error (PGF5)
66-67: Reserved
68: Sensorless estimated speed have wrong direction
69: Sensorless estimated speed is over speed
70: Sensorless estimated speed deviated
71~72: Reserved
73: External safety gate S1
74~81: Reserved
82: U phase output phase loss (OPHL)
83: V phase output phase loss (OPHL)
84: W phase output phase loss (OPHL)
85: PG-02U ABZ hardware disconnection
86: PG-02U UVW hardware disconnection
87~88: Reserved
89: Initial rotor position detection error
90: Inner PLC function is forced to stop
91~100: Reserved
101: CANopen software disconnect1 (CGdE)
102: CAN open software disconnect2 (CHbE)
103: Reserved
104: CANopen hardware disconnect (CbFE)
index setting error
105: CANopen
slave station number setting error
106: CANopen
(CAdE)
index setting exceed limit
107: CANopen
108~110: Reserved
111: Internal communication overtime error(InrCOM)
112: PM sensorless shaft Lock error
113: Reserved
0~65535(refer to bit table for fault code)
0~65535(refer to bit table for fault code)
0~65535(refer to bit table for fault code)
0~65535(refer to bit table for fault code)
0: Inverter motor
(fan doesn't run with the axel synchronously )
1: Standard motor
(fan runs with the axel synchronously)
2: Electronic thermal relay disabled
30.0~600.0 sec
0: Warn and keep operation
1: Warn and ramp to stop
2: Warn and coast to stop
3: No warning
0.0~100.0%
0.00~599.00Hz
11-24
Factory
Setting
(CIdE)
(CFrE)
60.0
50.0
Read
only
0
0
0
0
2
0