Delta CT2000 Series User Manual page 273

Chapter 12 Description of Parameter SettingsCT2000 Series
 ACI Low Point
Settings
 ACI Proportional Low Point
Settings
 ACI Mid Point
Settings
 ACI Proportional Mid Point
Settings
 ACI High Point
Settings
 ACI Proportional High Point
Settings
 When Pr.03-29=1, ACI setting is 0-10V and the unit is in voltage (V).
 When Pr.03-29≠1, ACI setting is 0-20mA or 4-20mA and the unit is in current (mA).
 When setting analog input ACI to frequency command, it 100% corresponds to Fmax (Pr.01-00
Max. operation frequency).
 Three of the ACI points can be set according to user's demand on voltage(current) and proportion,
there is no setting limit for ACI points.

Positive AUI Voltage Low Point
Settings

Positive AUI Voltage Proportional Low Point
Settings
 Positive AUI Voltage Mid Point
Settings
 Positive AUI Voltage Proportional Mid Point
Settings
Pr.03-29=1, 0.00~10.00V
Pr.03-29≠1, 0.00~20.00mA
-100.00~100.00%
03-29=1, 0.00~10.00V
03-29≠1, 0.00~20.00mA
-100.00~100.00%
03-29=1, 0.00~10.00V
03-29≠1, 0.00~20.00mA
-100.00~100.00%
0.00~10.00V
0.00~100.00%
0.00~10.00V
0.00~100.00%
12.1-03-25
Factory Setting: 4.00
Factory Setting: 0.00
Factory Setting: 12.00
Factory Setting: 50.00
Factory Setting: 20.00
Factory Setting: 100.00
Factory Setting: 0.00
Factory Setting: 0.00
Factory Setting: 5.00
Factory Setting: 50.00