Delta CT2000 Series User Manual page 238

Settings Functions
46 Master dEb signal output
47 Brake Release at Stop
48 Reserved
49 Homing Action Complete Output when homing action complete.
Output for CANopen
50
control
Output for
51
communication card
52 Output for RS-485
53~62 Reserved
Chapter 12 Description of Parameter SettingsCT2000 Series
AC Driver
U(T1)
V(T2)
W(T3)
When dEb arise at Master, MO will send a dEb signal to Slave. Then
Slave will follow Master's command and decelerate to stop
simultaneously.
When drive stops, the corresponding multi-function terminal will
be ON if the frequency is less than Pr.02-34. After it is ON, it will
be OFF when brake delay time exceeds Pr.02-32.
Output Frequency
RUN
Multi-function
Output
MO=d47
For CANopen communication output
For communication
(CMC-MOD01, CMC-EIP01, CMC-PN01 and CMC-DN01)
For RS-485 output
12.1-02-15
Descriptions
MC
MOx=45
MIx=49
Output Frequency
< Pr.02-34
RUN
02-32
output of communication
Motor
IM
3~
Time
cards