Delta CT2000 Series User Manual page 198

Parameter Protection Password Setting

Settings 1~9998, 10000~65535
 To set a password to protect your parameter settings. If the display shows 0, no password is set
nor password has been correctly entered in Pr.00-07. All parameters can then be changed,
including Pr.00-08. The first time you can set a password directly. After successful setting of
password the display will show 1. Be sure to write down the password for later use. To cancel the
parameter lock, set the parameter to 0 after inputting correct password into Pr. 00-07.
 How to retrieve parameter protection after decoding by Pr.00-07:
Method 1: Re-enter the password to Pr.00-08 (input the password once).
Method 2: After reboots, password function will be recovered.
Method 3: Input any value into Pr.00-07 (Do not enter the password).
.
Password Decode Flow Chart
Pass word Setting
00-08
Displays 01 after
correct password is
entered to Pr.00-08.
Decode Flow Char t
00-08
Password Set
00-07
Password Input
Pr.00-08=0
No
Re-apply power.
(The password is still valid)
Reserved
Control Mode

Settings
 This parameter determines the control mode of C2000 series AC motor drive.
0: No password protection / password is entered correctly (Pr00-07)
1: Password has been set
Pass word Forgotten
00-07
Enter 9999 and press ENTER,
then ente r 9999 aga in withi n 10
se cond s an d pre ss ENTER.
Then all pa ra meters will re set
to factory se ttings .
Yes
Shut down th drive
and re-app ly power
0: Speed mode
1: Point-to-Point position control
2: Torque mode
3: Home mode
Chapter 12 Description of Parameter SettingsCT2000 Series
3 chan ces of p assword inpu t:
Incorre ct p ass word 1:
Incorre ct p ass word 2:
Incorre ct p ass word 3: "Pcode "(blin king)
Keyp ad will be locked after 3 wrong attemp ted
pas swords. To re-activ ate t he k eypa d, pl ease
reboo t the drive an d in put t he correct
pas sword.
12.1-00-5
Factory Setting: 0
Pass word Incorrect
00-07
d ispl ays "01"
disp lays "02 "
Factory Setting: 0