Chapter 12 Description of Parameter SettingsCT2000 Series
Settings Functions
19
PG2 frequency command
20
Output for CANopen control
21
RS485 analog output
Analog output for
22
communication card
23
Constant voltage/current output
24
Reserved
25
CAN & 485 output
Gain of Analog Output 1 (AFM1)
Gain of Analog Output 2 (AFM2)
Settings
It is used to adjust the analog voltage level (Pr.03-20) that terminal AFM outputs.
This parameter is set the corresponding voltage of the analog output 0.
Analog Output 1 when in REV Direction (AFM1)
Analog Output 2 when in REV Direction (AFM2)
Settings
Reserved
AFM2 Output Bias
Settings
0.0~500.0%
0: Absolute value in REV direction
1: Output 0V in REV direction; output 0-10V in FWD direction
2: Output 5-0V in REV direction; output 5-10V in FWD direction
10V( 20mA)
03-18
03-21
0V
03-24
( 0mA)
03-22=0
03-25=0
Selections for the analog output dir ec ti on
-100.00~100.00%
Descriptions
Max. frequency Pr.01-00 is regarded as 100%.
For CANopen analog output
For communication output (CMC-MOD01, CMC-EIP01,
CMC-PN01, CMC-DN01)
For communication output (CMC-MOD01, CMC-EIP01,
CMC-PN01, CMC-DN01)
Pr.03-32 and Pr.03-33 controls voltage/current output
level
0~100% of Pr.03-32 corresponds to 0~10V of AFM1.
10V( 20mA)
F requenc y
0V
( 0mA)
03-22=1
03-25=1
12.1-03-21
Factory Setting: 100.0
Factory Setting: 100.0
Factory Setting: 0
Factory Setting: 0
10V( 20mA)
F requenc y
5V
( 12mA)
03-22=2
03-25=2
Factory Setting: 0.00