Chapter 12 Description of Parameter SettingsCT2000 Series
Password for Communication Card (Low word)
(Special parameter for MODBUS TCP card)
Password for Communication Card (High word)
(Special parameter for MODBUS TCP card)
Settings
Reset Communication Card
(Special parameter for MODBUS TCP card)
Settings
Additional Setting for Communication Card
(Special parameter for MODBUS TCP card)
Settings
Status of Communication Card
(Special parameter for MODBUS TCP card)
Settings
0~99
0: Disable
1: Reset, return to factory setting
Bit 0: Enable IP Filter
Bit 1: Internet parameters enable(1bit)
Enable to write internet parameters (1bit). This bit will change to disable
when it finishes saving the update of internet parameters.
Bit 2: Login password enable(1bit)
Enable login password (1bit). This bit will be changed to disable when it
finishes saving the update of internet parameters.
Bit 0: password enable
When the communication card is set with password, this bit is enabled.
When the password is clear, this bit is disabled.
12.1-09-17
Factory Setting: 0
Factory Setting: 0
Factory Setting: 1
Factory Setting: 0