Delta CT2000 Series User Manual page 287

Chapter 12 Description of Parameter SettingsCT2000 Series
Delta Motor (Low inertia model)
Rated Power(kW)
Rotor inertia (kg.m^2)
Delta Motor (Mid to High Inertia model)
Rated Power(kW)
Rotor inertia (kg.m^2)
※ For more information on motor inertia value, please refer to Pr.11-01.
Stator Resistance of PM Motor
Settings
Permanent Magnet Motor Ld
Settings
Permanent Magnet Motor Lq
Settings
PG Offset angle of PM Motor

Settings
 When Pr.05-00 is set to 4, the drive will detect offset angle and write into Pr.05-42.
 Ke parameter of PM Motor
Settings
0.1 0.2
3.70E-06 1.77E-05 2.77E-05 6.80E-05 1.13E-04 2.65E-04 4.45E-04
0.5 1
8.17E-04 8.41E-04 1.12E-03 1.46E-03 3.47E-03 8.17E-04 8.41E-04 1.12E-03
0.000~65.535
0.00~655.35 mH
0.00~655.35 mH
0.0~360.0°
0~65535
12.1-05-9
0.4 0.4 0.75
1.5 2 2
1 2
0.3 0.6 0.9
Factory Setting: 0.000
Factory Setting: 0.00
Factory Setting: 0.00
Factory Setting: 0
Unit: V/1000rpm
Factory Setting: 0