Delta CT2000 Series User Manual page 335

Chapter 12 Description of Parameter SettingsCT2000 Series

~ Reserved
Response Delay Time

Settings
 This parameter is the response delay time after AC drive receives communication command as
shown in the following.
RS-485 BUS
PC or PLC command
Main Frequency of the Communication

Settings
 When Pr.00-20 is set to 1 (RS485 communication). The AC motor drive will save the last
frequency command into Pr.09-10 when abnormal turn-off or momentary power loss. After reboots
the power, it will regards the frequency set in Pr.09-10 if no new frequency command is inputted.
Block Transfer 1

Block Transfer 2

Block Transfer 3

Block Transfer 4

Block Transfer 5

Block Transfer 6

Block Transfer 7

Block Transfer 8

Block Transfer 9

Block Transfer 10

Block Transfer 11

Block Transfer 12

Block Transfer 13

Block Transfer 14

Block Transfer 15

Block Transfer 16

Settings
 There is a group of block transfer parameter available in the AC motor drive (Pr.09-11 to Pr.09-20).
User can use them (Pr.09-11 to Pr.09-20) to save those parameters that you want to read.
0.0~200.0ms
Handling time
of the AC drive
0.00~599.00Hz
0~65535
12.1-09-11
Factory Setting: 2.0
Response Message
of the AC Drive
Response Delay Time
Pr.09-09
Factory Setting: 60.00
Factory Setting: 0