Delta CT2000 Series User Manual page 338

CANopen Control Status
Settings 0: Not ready for use state
1: Inhibit start state
2: Ready to switch on state
3: Switched on state
4: Enable operation state
7: Quick stop active state
13: Err reaction activation state
14: Error state
Reserved
Reserved
CANopen Master Function
Settings 0: Disable
1: Enable
CANopen Master Address
Settings 0~127
~ Reserved
Identifications for Communication Card
Settings 0: No communication card
1: DeviceNet Slave
2: Profibus-DP Slave
3: CANopen Slave/Master
4: Modbus-TCP Slave
5: EtherNet/IP Slave
6~8: Reserved
Firmware Version of Communication Card
Settings Read only
Chapter 12 Description of Parameter SettingsCT2000 Series
12.1-09-14
Factory Setting: Read Only
Factory Setting: 0
Factory Setting: 100
Factory Setting: ##
Factory Setting: ##