Delta CT2000 Series User Manual page 34

The Lifting Hook
Frame D (Flange mounted models)
The arrows indicate the location of the lifting
holes of frame D, as shown in figure below.
Note: Refer to figure a if the second-last word
of model is "A"; if it's "B" then refer to figure b.
a.
Ensure the angle between the lif ting holes and the lifting device is within the specification, as
shown in the following figure.
Applicable to Frame D (VFD450CT43F00B; VFD550CT43F00B; VFD750CT43F00A6;
VFD900CT43F00A8)
Ensure the lifting hook properly goes through
the lifting hole, as shown in the following
diagram.
b.
3-3
Chapter 3 UnpackingCT2000 Series
Weight: 37.6kg (82.9lbs.)±0.5%