Delta CT2000 Series User Manual page 234

Output terminal of I/O extension card (MO11)

Output terminal of I/O extension card (MO12)

Output terminal of I/O extension card (MO13)

Output terminal of I/O extension card (MO14)

Output terminal of I/O extension card (MO15)

Output terminal of I/O extension card (MO16)

 Output terminal of I/O extension card (MO17)
 Output terminal of I/O extension card (MO18)
 Output terminal of I/O extension card (MO19)
 Output terminal of the I/O extension card (MO20)
Settings
0: No function
1: Operation Indication
2: Operation speed attained
3: Desired frequency attained 1 (Pr.02-22)
4: Desired frequency attained 2 (Pr.02-24)
5: Zero speed (Frequency command)
6: Zero speed, include STOP(Frequency command)
7: Over torque 1(Pr.06-06~06-08)
8: Over torque 2(Pr.06-09~06-11)
9: Drive is ready
10: Low voltage warning（LV）(Pr.06-00)
11: Malfunction indication
12: Mechanical brake release(Pr.02-32)
13: Overheat warning (Pr.06-15)
14: Software brake signal indication(Pr.07-00)
15: PID feedback error
16: Slip error (oSL)
17: Terminal count value attained (Pr.02-20; not return to 0)
18: Preliminary count value attained (Pr.02-19; returns to 0)
19: Base Block
20: Warning output
21: Over voltage warning
22: Over-current stall prevention warning
23: Over-voltage stall prevention warning
24: Operation mode indication
25: Forward command
26: Reverse command
27: Output when current >= Pr.02-33 (>= 02-33)
28: Output when current <=Pr.02-33 (<= 02-33)
Chapter 12 Description of Parameter SettingsCT2000 Series
12.1-02-11
Factory Setting: 0