FujiFilm DR-ID 1300 Service Manual page 246

 MC MP Network Setting
Set the MP1 and MP2 addresses.
(1) Click "UTILITY" - "Replace MP".
The Replace MP window opens.
(2) If the MP1 and MP 2 addresses are to be changed, input "Updated
Value" in the MC MP Network Setting window, and click [SET].
The address of the MP will be updated.
(3) Turn OFF the power of the MP, and then turn it ON again.
(4) Left-click the MC Manager from the task tray and execute "EXIT".
Check that the MC Manager icon has disappeared from the task tray,
and then start the MC Manager from "Start menu" → "Start-up".
018-234-06E
 Changing the MP IP Address (Preset)
(1)
(2)
(2)
1200_400118E.ai
DR-ID 1300 / DR-ID 1300PU Service Manual
Chang the MP IP address (preset) from the default values.
(1) Click "UTILITY" - "Replace MP".
The Replace MP window opens.
(2) If the MP1 and MP 2 addresses are to be changed, input "Updated
Value" in the Changing the MP IP Address (Preset) window, and click
[SET].
The address of the MP will be updated.
(3) Turn OFF the power of the MP, and then turn it ON again.
(4) Left-click the MC Manager from the task tray and execute "EXIT".
Check that the MC Manager icon has disappeared from the task tray,
and then start the MC Manager from "Start menu" → "Start-up".
MU1-81
(1)
(2)
(2)
1200_400119E-1.ai
MU1-81