(11) Click [SET] on the CL NAME window.
Write into the HDD starts.
#1 Click: [SET]
CL NAME window
CAUTION
While write into the HDD is in progress, never turn OFF the CL power and the
circuit breaker of the distribution switchboard. If turned OFF, the data on the
HDD gets damaged, and the CL cannot boot up as a result.
(12) Make sure that the write into the HDD has completed, and press any
key on the keyboard.
#1 Check: "Install is complete"appears on the Command Prompt window
#2 Press: Any key on the keyboard
Command Prompt window
#1
#2
018-234-04E
#1
1200_700090.ai
600_700066.ai
(13) Click [OK].
The DX Console restarts automatically.
#1 Click: [OK]
→ Start up the MC Manager from [Start] menu.
DR-ID 1300 / DR-ID 1300PU Service Manual
IN2-57
#1
600_700067.ai
IN2-57