FujiFilm DR-ID 1300 Service Manual page 520

(4) Rename "Local Area Connection" to "Eth0", and "Local Area
Connection 2" to "Eth1".
u NOTE u
Be sure to rename the Eth0/Eth1.
Otherwise, errors may occur, for example, software update.
#1 Rename: "Local Area Connection" to "Eth0"
#2 Rename: "Local Area Connection 2" to "Eth1"
#1
(5) Select "Eth1", and then select [Properties] from the right-click menu.
The Network Properties dialog opens.
#1 Right-click: Eth1
#2 Click: [Properties]
018-234-02E
#2
600_700240.ai
#1
#2
600_700241.ai
(6) Select "Internet Protocol Version 4 (TCP/IPv4)" and click [Properties].
The Internet Protocol Version 4 (TCP/IPv4) Properties dialog opens.
#1 Select: Internet Protocol Version 4 (TCP/IPv4)
#2 Click: [Properties]
(7) Click the [Use the following IP address:] radio button, and then input
the IP address below.
- IP address: 192.168.0.10
- Subnet mask: 255.255.255.0
#1 Select: Use the following IP address
#2 Input: IP address, Subnet mask
DR-ID 1300 / DR-ID 1300PU Service Manual
IN2-43
#1
#2
600_700242.ai
#1
#2
600_700243.ai
IN2-43