FujiFilm DR-ID 1300 Service Manual page 584

<Enabling set value (MP)>
(1) Click [MP Network Setting >>] on the NETWORK SETTING window.
The MP Network Setting window >> appears.
(2) Click [MP1 Network Setting >>] on the MP Network Setting window >>.
The MP1 Network Setting >> window appears.
(3) Click [Setting for MP1].
The confirmation dialogue box of "Are you sure?" appears.
(4) Click [OK].
(5) Check that the set value is effective.
The IP address of the MP is rewritten, and the IP address is reflected after
restarting the MP.
#1 Check: OK indication
MP Network Setting>>window <Display example>
(6) Click [BACK] to return to the MP Network Setting >> window.
(7) Click [BACK] to return to the NETWORK SETTING window.
(8) Turn OFF the power of the MP, and then turn it ON again.
(9) Left-click the MC Manager from the task tray and excute "EXIT".
Check that the MC Manager icon has disappeared from the task tray, and then start
the MC Manager from "Start menu" → "Start-up".
018-234-02E
#1
1200_700168E.ai
<Enabling set value (MC)>
(1) Click [Update Network Setting (MC ETH1)] on the NETWORK SETTING
window.
The confirmation dialogue box of "Are you sure?" appears.
(2) Click [OK].
(3) Check that the set value is effective.
The IP address of the MC is rewritten, and the IP address is reflected after
restarting the MC.
#1 Check: OK indication
Update Network Setting
(MC ETH1)
(4) Left-click the MC Manager from the task tray and excute "EXIT".
Check that the MC Manager icon has disappeared from the task tray, and then start
the MC Manager from "Start menu" → "Start-up".
DR-ID 1300 / DR-ID 1300PU Service Manual
<Display example>
#1
1200_700169E.ai
AppxIN3-4
AppxIN3-4